Category: Materials synthesis and treatment
Manufacturer; Model: Diamond WireTec; DWS 100
Short description: The diamond wire saw type DWS100 from Diamond WireTec is suited for the cutting of very small workpieces with cutting surfaces of up to 90 x 90 mm, e.g. for chips, LEDs, EPROMs, etc. Suitable for ceramic, plastic samples, not suitable for metals.
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Raith; eLINE Plus
Short description: Ultra high resolution electron beam lithography system for nanofabrication on substrates up to 100 mm. Laser interferometer stage with resolution 1 nm. Secondary electron detectors for high resolution imaging. System equipped with load lock and Traxx and Periodixx features.
Category: Materials synthesis and treatment; Spectroscopy methods and lasers
Manufacturer; Model: Heidelberg Instruments; µPG 101
Short description: Laser writer Heidelberg µPG is a direct write mask-less lithography system that utilises UV laser beam to selectively expose samples in regions of interest. The write head also defines the feature size, which is defined as sub-1µm in the current set up.
Category: Materials synthesis and treatment; Spectroscopy methods and lasers
Manufacturer; Model: Suss Microtec; MA/BA6 Gen4
Short description: Mask aligner is designed to accurately align masks with substrates enabling photlitography.
Category: Materials synthesis and treatment; Chemical laboratories and their equipment
Manufacturer; Model: Milestone Srl; SynthWAVE T660
Short description:
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Sidrabe; SAF25/50
Short description: The SAF25/50 multifunctional R&D cluster tool is intended for research and development works as well as for feasibility studies and more general academic work in the field of thin film technologies.
Category: Materials synthesis and treatment; Chemical laboratories and their equipment
Manufacturer; Model: Fritsch; Pulverisette 5
Short description: Planetary mill is widely applicable in materials synthesis and treatment.
Category: Materials characterization; Materials synthesis and treatment
Manufacturer; Model: Metrohm Autolab; PGSTAT302N
Short description: Tool is purposed for galvanostatic and potentiostatic measurements for electrochemical systems such as electrochemical cells, batteries, or fuel cells.
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Ražotājs; modelis
Short description: Spin coater is tool for application of a thin film (a few nm to a few um) evenly across the surface of a substrate by coating (casting) a solution of the desired material in a solvent (an "ink") while it is rotating.
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Laurell; WS-650Mz-23NPPB/UD3
Short description: Spin coater is tool for application of a thin film (a few nm to a few um) evenly across the surface of a substrate by coating (casting) a solution of the desired material in a solvent (an "ink") while it is rotating.
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Edwards; Auto 306
Short description: The AUTO 306 is a compact, versatile vacuum coater. Tool is designed for physical vapour deposition processes under high vacuum. It is not suitable for use on processes which use chemical vapour deposition.
Category: Materials synthesis and treatment; Chemical laboratories and their equipment
Manufacturer; Model: Elma - Elmasonic S 120 (H)
Short description: Ultrasound frequency 37 kHz, volume 12.75 L, ceramic heater, electronic time and temperature control.
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: F&S Bondtec; 53xx BDA
Short description:
Category: Materials synthesis and treatment; Cleanrooms
Manufacturer; Model: Novascan Technologies - PSDP-UV8T
Short description: UV Ozone Cleaner is capable of removing contamination on the surface of samples. By using a high-power UV light source, ozone is generated - which then breaks down surface contaminants into volatile compounds.
Category: Chemical laboratories and their equipment; Materials synthesis and treatment
Manufacturer; Model: SHANGHAI YUANHUAY INDUSTRIAL CO., LTD. - DZF-6020
Short description: Temperature range 50~180°C, vacuum degree <133Pa, working size (mm): 300x300x275.
Category: Materials characterization; Materials synthesis and treatment; Microscopy
Manufacturer; Model: Form Factor - MPS 1500
Short description: